• Home
  • How to Buy a Steel Garage Kit in Ontario

How to Buy a Steel Garage Kit in Ontario

Structural Engineer

Published

22 Nov 2026 · 5 minutes Read

#1 Metal Buildings in Ohio | Toro Buildings Dream Shop – Thrive Base
9Things to consider
$26 CADStarting price per sq ft in Canada
2Ontario offices: Markham and Oshawa
40+ yearsBuilding steel buildings

How do you buy a steel garage kit in Ontario? Buying a steel garage kit in Ontario comes down to four things: choosing a kit built for how you'll use it, sizing it for your vehicles and future needs, making sure it's engineered for your area's snow and wind loads, and confirming permit requirements with your municipality before you order. A prefabricated steel garage is durable, fast to assemble, and far easier to maintain than a garage built from scratch on-site, and it can serve as a garage, storage building, workshop, or extra room.

Key takeaways

  • Engineered for your address. Ontario snow loads change a lot from Windsor to the snowbelt.
  • Permits come from your municipality. Under the Ontario Building Code, with local zoning rules on top.
  • Size for the future. Plan for the vehicles and gear you'll have in five to ten years.
  • Know what the price covers. The kit is the engineered shell; freight, foundation and assembly are separate.

9 things to consider when buying a steel garage kit

Work through these before you request a quote.

1. How you'll use it

Decide the garage's main purpose first. Vehicle storage calls for roll-up or sliding doors sized to your largest vehicle. A workshop benefits from windows, vents, insulation, and planned electrical. Choose a steel garage kit designed around that primary use, with room for the secondary ones.

2. Dimensions

Make sure the interior is large enough for everything you'll park or store, plus the accessories you plan to add. Trucks and SUVs need more length and door clearance than a sedan, and most owners accumulate more tools and gear over time, so plan for five to ten years out, not just today. As a starting point, a single-car garage is typically 12x20 and a tight two-car garage about 18x20, while 24x24 gives two vehicles comfortable room; add depth for trucks, workbenches, or storage. See our guide to what size garage you need.

3. Snow and wind loads for your location

This matters more in Ontario than almost anywhere. Snow loads vary widely across the province: lake-effect snowbelt communities near Lake Huron, Georgian Bay, and Lake Superior see far heavier snow than areas like Windsor or Toronto. A garage kit should be engineered for your exact address, not a provincial average. Toro won't sell a building until our in-house engineers have approved it for its specific location.

4. Material quality

Steel is durable by nature, but quality varies between suppliers. Ask what steel and coating a kit uses. Toro uses Galvalume Plus steel, widely regarded as one of the most durable options for garage kits. Read more about Galvalume Plus steel.

5. The real cost

Toro's steel building kits start at $26 per square foot in Canada (CAD) and $19 per square foot in the U.S. Freight isn't included. Your size, options, intended use, and local snow, wind and seismic loads and codes set the final price, so every building needs a quote to make sure it meets the loads and codes where you'll build. Watch for low advertised prices with hidden fees, or quotes for buildings that aren't actually rated for your area. Toro's True Pricing model quotes the exact building you need for your location. Remember that the kit price covers the engineered shell; freight, your foundation, assembly, and permits are separate.

6. Permits

In Ontario, building permits are issued by your local municipality under the Ontario Building Code, and a garage-sized structure will almost always need one. Check zoning rules for detached accessory buildings too: setbacks, maximum height, and lot coverage limits vary by municipality. Every Toro kit ships with engineer-stamped drawings to support your permit application.

7. Accessories and extras

Most steel garage kits can be customized with windows, personnel doors, roll-up or sliding doors, vents, and insulation. Toro engineers the framed openings, and most customers buy doors locally. Ask what's available before you order: adding accessories during design is far easier than retrofitting later. You can also plan for electrical, lighting, and shelving once the garage is up.

8. Design that fits your property

A steel garage doesn't have to look industrial. Choose colours, trim, and door styles that complement your home, so the garage looks like it belongs on your property rather than like an add-on. See choosing a colour for your steel garage.

9. Assembly time and the warranty

Garage kits come with all the parts and detailed instructions for nut-and-bolt assembly. Both straight-wall and arch-style garages bolt together; smaller buildings are straightforward DIY projects, while larger ones usually go faster with a local contractor. Straight-wall buildings carry a 1-year limited material warranty and a 25 to 40-year paint warranty, depending on panel and finish; arch-style buildings carry a 50-year limited rust perforation warranty.

White steel garage with a roll-up door in dappled sunlight
A single-door steel garage on an Ontario property

Price your Ontario garage

Tell us your vehicles and your address, and a building consultant will size and price a garage engineered for your local snow load, with a quote within 1 business day.

Ontario snow and climate by region

Why one Ontario garage design doesn't fit every town.

RegionWhat to plan forDesign focus
Southwestern Ontario (Windsor, London)Lighter snow, humid summers, thunderstormsWind, drainage and condensation control
Greater Toronto and HamiltonModerate snow, freeze-thaw cyclesSnow load, slab and drainage details
Lake Huron and Georgian Bay snowbeltHeavy lake-effect snow and driftingHigher roof snow load, drift near taller buildings
Eastern Ontario and Ottawa ValleyCold winters and steady snowfallSnow load and insulation
Northern OntarioLong, cold winters, heavy snowHigh snow loads, insulation and frost depth

General guidance. Ontario snow and wind loads come from climatic data in the Ontario Building Code; your engineer-stamped drawings show the exact loads for your address.

Cold winters make insulation worth considering if you'll heat the garage or use it as a workshop. Insulation can be added to Toro kits as an option. See how to insulate a steel building and 7 ways to prevent condensation.

Common steel garage sizes

Start here, then measure your own vehicles.

GarageCommon sizeRead more
Single car12x20 to 16x24One car garage dimensions
Two cars24x24 to 24x3024x30 steel building
Two cars plus workshop30x4030x40 steel building
Three to four cars36x30 to 40x4040x40 steel building
Vehicles, RV and workshop40x60 and up40x60 steel building

General guidance. Your vehicles, doors and storage set the right size.

Watch Ontario steel buildings

Steel garage kit vs. a stick-built garage

How the two compare for an Ontario property.

FactorSteel garage kitWood-framed garage
Snow and wind designEngineered for your address, stamped drawingsDepends on the builder and plans
Build timePre-cut parts bolt togetherFramed piece by piece on site
MaintenanceVery low; no rot or carpenter antsPainting, sealing and rot repair over time
FireNon-combustible framing and panelsCombustible framing
FlexibilityClear-span interior, easy to repurposeInterior posts or walls in wide garages

General comparison.

A steel garage kit also gives you a fixed, engineered package, so you know what you're getting before the first truck arrives. With a stick-built garage, lumber prices, framing labour and weather delays can move the final cost. For a full comparison, read comparing metal and wooden garages. If you're still deciding between a steel garage kit and a carport, see carport vs. garage, and remember a steel garage kit can be engineered with a lean-to for extra covered parking.

Getting a permit in Ontario

Typical steps for a detached garage.

  1. Check zoningConfirm setbacks, height, lot coverage and accessory building rules with your municipality.
  2. Get your quote and drawingsYour steel garage kit is engineered for your address and comes with engineer-stamped drawings.
  3. Prepare the site planShow the garage location, distances to lot lines and other buildings, and the driveway.
  4. Design the foundationToro provides the structural reactions; a local designer or contractor details the slab or footings for frost protection.
  5. Apply and pay feesSubmit to your municipality's building department.
  6. Book inspectionsExpect inspections such as footings or slab and the finished building.

Requirements vary by municipality, so call your building department early. Our metal garage guide part 2 covers regulations and site planning in more detail.

Building through an Ontario winter

Timing your order around the seasons.

Many Ontario owners order in late fall or winter so the building arrives when the ground thaws and contractors are available. Delivery usually takes 2 to 8 weeks, but always confirm timing with your building consultant. Foundations can be poured in cold weather with the right precautions, and steel buildings can be assembled in winter, as the 35x70 winter build shows, but a frozen, snow-covered site slows everything down.

Plan delivery access too: the truck needs a firm route to your site, and you're responsible for unloading. Spring load restrictions on some Ontario roads can affect heavy deliveries, so ask your municipality if your road has them.

How to buy from Toro

From your first call to delivery.

  1. Design or callSketch your garage in the free 3D designer or call a building consultant at 1-877-870-8676.
  2. Get a quoteShare your Ontario address and use; quotes come within 1 business day.
  3. Confirm the specsA design specialist confirms the exact specs before production.
  4. Secure your orderA 25% deposit on signing secures the building, then step payments through delivery.
  5. Permits and foundationPull your permit and build the foundation to the structural reactions.
  6. Delivery and assemblyYou unload, then assemble yourself or with a local contractor. Toro doesn't install.

Try your design in the 3D building designer before you call. Toro's building specialists also speak French, which helps owners in eastern Ontario and Quebec.

Why buy factory-direct from Toro

No middleman, and engineers who know Ontario.

Buying factory-direct means no middleman markup and direct access to the engineers designing your garage. Toro's in-house engineering team, rather than an outsourced engineer, sizes every garage to your local loads, and Toro is certified to the CAN/CSA-A660 standard for steel building manufacturers. Every kit is customized to your space and use, whether that's a one-car garage, a man cave, or a commercial depot. Toro has sold more than 100,000 buildings over more than 40 years. Read why choose a Canadian steel building supplier.

Save on a steel garage kit in Ontario

Toro makes 500+ buildings a month, and about 10% are never delivered because a customer's plans change. These clearance buildings are offered at a discount, re-engineered for your site if needed and come with stamped drawings. Inventory changes daily and not every building is listed online, so call to ask about unlisted clearance inventory in garage sizes near you.

Permits, codes and engineering

Engineered for your Ontario address.

Ontario's Building Code is closely harmonized with the National Building Code of Canada, and steel component design follows CSA Group standards. Toro's in-house engineering team calculates your garage's design loads for its specific Ontario address before it ships. Toro designs, engineers, manufactures, and ships the kit; you or your local contractor handle the foundation and assembly.

Frequently asked questions

Buying a garage in Ontario? Price your building and a building consultant will walk you through it.

Do I need a permit for a steel garage in Ontario?

Almost always. Permits are issued by your municipality under the Ontario Building Code, and zoning rules for accessory buildings also apply.

How much does a steel garage kit cost in Ontario?

Toro kits start at $26 per sq ft (CAD), with freight not included. Your size, options and local snow and wind loads set the final price.

Can a steel garage handle Ontario snow?

Yes, when it's engineered for the snow load at your address. Every Toro garage comes with engineer-stamped drawings for its location.

Can I assemble the garage myself?

Yes. Kits bolt together with no welding. Smaller garages are realistic DIY projects; larger ones go faster with a local contractor.

Are garage doors included?

Usually not. Toro engineers the framed openings, and most customers buy doors locally.

Where are Toro's Ontario offices?

Toro has offices in Markham and Oshawa, Ontario, and a call service answers 1-877-870-8676 24 hours a day.

Written by Noah Sinclair, Toro's in-house structural engineer. Every Toro building is engineered for your site's snow, wind and seismic loads and comes with engineer-stamped drawings. Buildings are made in 30+ manufacturing facilities across the U.S. and Canada.

Follow Toro

Keep reading

Browse all articles

Get your steel garage kit

Toro Steel Buildings engineers every steel garage kit to your Ontario address and your needs, with a quote within 1 business day.

Join 100,000+ customers who built with Toro

Tell us your size, location and how you'll use the building. A Toro building consultant will come back with an engineered, code-compliant quote within 1 business day. Prefer to talk? Call 1-888-995-3432, or browse in-stock clearance buildings at reduced prices.